Paintless Dent Repair Tools

notes:

1. The alcohol bottle in this set is an empty bottle, alcohol-free liquid degumming water

how to use?

1. Dent caused by collision, scratch and impact.

2. Choose a label that matches the shape and size of the dent.

Apply hot melt glue to the center of the faucet and inside the inner and outer rings to make the glue on the faucet even and full.

3. Align the center point of the label with the center point of the dent, then quickly place the label on the dent and press gently until the space

The distance between the faucet and the indent is 1mm, then release your hand until it is fixed on the indent.

4. Fix the adjusted dent lifter in the tab, hold the handle, and lift it up evenly

How to use the tool?

1. Clean the damaged surface with a clean damp cloth;

2. Put the glue stick on the spray gun, connect the power supply, and preheat for 5-10 minutes;

3. Pull the trigger and apply a suitable drawing gasket with extrusion glue (the 4 holes of the gasket should be coated with hot melt adhesive);) (Note: the larger the drawing gasket, the greater the pulling force);

4. Immediately place the brushed gasket coated with hot melt glue in the center of the dent and keep it until it sticks (let the glue cool for about 5-8 minutes. The cooling time should be less than 10 minutes, and it should be slightly shorter in winter);

5. Align the T-shaped trimmer, press the wire drawing gasket with hot melt adhesive, and pull the slide bar back to pull up the dent;

6. After the dent is removed, use a plastic shovel to remove the glue with alcohol;

7. If the dent remains, tap lightly with a flattening hammer with a Tapdown head

8. Repeat the above steps until the dent is repaired.